Permatex® Silicone Adhesive Sealant - Black
Product Information
This all-purpose black silicone adhesive sealant provides a waterproof, protective seal around metal, glass, rubber, and more. It's designed for both interior and exterior use. This product is not recommended for engine gasketing applications or windshield installation.
- General purpose adhesive
- For interior or exterior use
- Seals and insulates
- Weather-resistant
Warning: Uncured sealant causes eye and skin irritation. Use in a well- ventilated area. In case of skin contact, wipe off and wash with soap and water. In case of eye contact flush with water for 15 minutes; get medical attention. If swallowed, do not induce vomiting. If overcome by fumes, get fresh air. See Safety Data Sheet for complete GHS hazard communication. Keep out of the reach of children.
Usage Instructions: Directions: 1. Clean and dry all surfaces. 2. Cut nozzle to desired bead size and apply to one surface. 3. Assemble immediately. Surfaces being bonded may need clamping for 1 hour or until silicone is firm. Silicone becomes tack free in one hour. 4. Allow 24 hours for full cure under normal conditions. Allow more time in cold or dry conditions. 5. Trim excess with a sharp knife after cure. Note: Paint will not adhere to silicone.
We'd love to hear your honest opinion. Help other shoppers by submitting a rating and review.